Your health comes first. This educational article provides general information. Discuss your individual circumstances, pregnancy, illness or symptoms with your clinician; the article cannot replace an individual assessment.

Pyramidal and polarised are two common words in endurance training, useful only if we mean the same ranges by them. A second zone displayed on a watch and a study’s Z2 can represent very different intensities. A useful comparison starts by clarifying the boundaries, counting method and actual training task.

Two boundaries create the three-zone map used in research

A three-zone approach divides intensity using two boundary points. One range lies below the lower point, another between the two points and the third above the upper point. For the research question, what matters is how those points were determined. They may derive from laboratory breathing or lactate responses, or a method related to another performance parameter.

Numbers alone are therefore insufficient. Z1 is not a universal speed meaning the same thing in every system, and Z2 is not automatically identical to the blue or green range on your watch. Look in the study’s methods to find what separates the parts. Understand the map’s legend before its name.

A study analysing a large marathon-running database, for example, used critical speed as the upper boundary and estimated the lower transition using a specified fraction of CS. Another design may rely on ventilatory points established in a laboratory. These procedures cannot be treated as perfectly interchangeable for every runner at every speed.

Meanwhile, your watch’s five zones may display several smaller ranges, often based on different inputs. Settings may relate to maximum heart rate, heart rate reserve or an estimated threshold. You cannot therefore map three parts onto five purely by their numbers. First know the device’s own rule and the study’s rule.

The names pyramidal and polarised describe the shape of a distribution

In a pyramidal distribution described with three zones, the largest volume lies in the lower range, less in the middle and still less in the upper range. In a polarised approach, the lower range also dominates, while the middle range is smaller and the upper range more prominent relative to it. These are general names for patterns; precise classification criteria must always be tied to the particular analysis.

The label does not reveal the full structure of the sessions. A time ratio does not show which days contained the work, how long the repetitions were or how recovery fitted around them. Two weeks with similar distributions may present different tasks. The shape is therefore an overview description worth reading alongside the actual training calendar.

General three-zone pattern Lower range Relationship between middle and upper
Pyramidal The largest share More in the middle than in the upper range
Polarised The largest share Less in the middle, with the upper range more prominent

The table provides a descriptive conceptual reference, not an individual training prescription. In practice, an analysis may attach additional percentage or ratio rules to its categories. Absolute volume and method therefore need examination alongside the two labels. One word does not replace a detailed programme.

A runner stops to check a sports watch among tall city buildings before continuing.Enlarge image
Editorial illustration created with an AI tool; not a documentary photograph.

What happens if you read a watch’s Z2 as a study’s Z2?

Imagine a runner whose watch displays the second range in a personally configured five-zone system. They follow it as easy running. They then read a study calling work between two defined points Z2 in a three-zone model. Treating the two numbers as identical can lead to a very different conclusion about how much moderate work they have done.

The mistake can work both ways. Someone may believe they do too much middle-intensity work when the app uses a different boundary. Another may think they do hardly any, while several runs would fall there under the research boundary. The solution is not a general conversion table, but comparison of the two systems’ inputs and boundaries.

First write down where the watch setting comes from: an automatic estimate, a previous assessment or a value entered manually? Then check whether the study uses the same variable. Speed-based and heart rate zones can also classify time differently, particularly at changing intensities. Similar names do not make the measured minutes identical.

If there is insufficient information to map the systems, that is useful to establish in itself. You can follow your own system consistently without claiming to measure precisely the same ratio as the study. Accuracy of comparison comes from understanding the method, not confident labelling.

A large database and a smaller experiment provide different kinds of knowledge

In the large marathon analysis, faster groups had substantial easy volume and frequently pyramidal patterns. Such an observation shows which preparation was associated with recorded results. That differs from assigning runners to programmes in advance and comparing their effects. Participants’ abilities and the total volume undertaken may also form part of the relationship.

The eight-week study by Festa and colleagues compared two programmes with different distributions in recreational runners. Zones related to laboratory-determined heart rate boundaries, and the programmes’ overall load was also addressed. Improvements were reported in both groups; the outcomes examined did not show a clear difference between groups. Total training time differed, and the performance test was not a full marathon.

In the 2026 twelve-week follow-up study, a pyramidal distribution was described in 48 runners preparing for a marathon or half-marathon. Some volume measures in the middle range were associated with better performance in that sample. This illustrates why the mere presence of moderate intensity cannot be classified as a mistake. The study design and the purpose of training matter.

You do not have to choose one winning method from these three findings. First ask who was measured, with which zone boundaries, for how long, at what total volume and with which outcome. These details are closer to the decision leading towards a marathon target than a general promise attached to a method’s name.

Two fictional 300-minute weeks contain the same easy time

The numerical example below is purely for interpreting distribution. The three ranges in Week A contain 240, 40 and 20 minutes. Week B contains 240, 10 and 50 minutes. Both total 300 running minutes, with 80% in the lower range. The middle and upper portions differ, however, so their simplified conceptual patterns differ too.

In Week A, the middle portion is 13.3% and the upper 6.7%, giving a pyramidal pattern. In Week B, the middle is 3.3% and the upper 16.7%, giving a polarised pattern. An 80% easy share therefore does not distinguish the two. Looking only at the low-intensity share leaves an important difference hidden.

The example does not claim that Week A or B is better for you. Nor does it provide a training calendar: it does not show which days and sections contain the minutes. Fifty minutes in the upper range can be assembled in several ways, and execution conditions can differ too. The numbers help reveal the structure behind the names.

If you find a similar shift in your own diary, first establish whether it arose from an actual training change or a change in classification. A new threshold can move the same runs into different categories. A changed method label does not therefore always mean a deliberate programme change. Dating zone settings and keeping the original sessions help clarify this.

Give middle intensity a named task

The middle range is often discussed as though its very presence were a poor decision. A more useful question concerns what the session serves. It may be deliberately planned sustained work or practice for a particular race task. That differs from days intended to be easy regularly becoming faster by accident. Similar time in a zone can conceal different intentions and weekly structures.

Naming the task helps assessment. What did you want to practise, for how long and how did it fit the other days? Without a clear answer, the label alone is insufficient. With one, a moderate portion is not automatically a mistake because a popular summary of a method shows less of it.

Equally, a higher range is not valuable simply because it fits a polarised pattern. The session needs an appropriate purpose, manageable volume and a place suited to the whole weekly programme. A report can describe these afterwards, but does not decide for you whether the task was justified. Your own response and the training plan as a whole also belong in the assessment.

In marathon preparation, it is worth examining periods rather than squeezing every week into the same shape. A week may have a different purpose, be lighter or contain a race. If you fill a zone for the sake of a method name, description starts directing the work instead of purpose. The consistent question remains: what did we want to achieve with this period?

Two adult runners jog easily at a conversational pace on a broad waterside path, without forcing the pace.Enlarge image
Editorial illustration created with an AI tool; not a documentary photograph.

A map of your own methods for the next coaching discussion

Prepare a short description of what you currently call easy, moderate and higher intensity. Add the variable used, the source of the boundaries and the date of the setting. Then state whether you count time, distance or session purpose. These few lines create a shared language with a coach or running companion; without them, you can easily use the same word for different tasks.

Put total volume in the next part. How much running time and how many sessions actually fit, and which other sports or life demands accompany them? A ratio from a higher-volume group cannot automatically be copied onto a runner with less time available. Specific minutes alongside percentages make the task undertaken visible.

Finally, state the specific goal: which ability or execution task do you want to follow, and which observation will be used for assessment? If that is clear, pyramidal or polarised can be a useful summary. If not, the label only appears to answer the question. A good map of methods connects classification with actual work.

You can follow the same order when reading research. Find the zone boundaries and unit first, then participants and programme, and finally the result. This makes it possible to notice when similarly named systems measure different things. Understanding the difference does not obstruct learning; it makes the transferable idea more precise.

Marathon preparation may therefore need shared meaning rather than another label. If you understand the ranges in the same way, ratios can be followed, tasks compared and reasons for change explained. The method name then becomes a short description of a plan backed by genuinely understood training linked to an individual goal.

Sources

Helpful? Pass it on.