The temperature at ground level changes very little, yet the forecast may switch between snow, mixed rain and snow, and freezing rain. To understand the change, you also need to think upwards. A falling particle may pass through layers at different temperatures between the cloud and the ground: along the way it may melt, refreeze, or reach a cold surface as a liquid. A single air temperature on your phone does not show this entire journey.

This has practical significance for runners. Precipitation that looks like raindrops does not necessarily produce the same conditions underfoot as mild autumn rain. Below, we explain the different types of winter precipitation in everyday language, follow a falling particle through our own layered example, and show which information you actually need to check before setting off. The examples are for learning; they do not require a test run on local ice.

The falling particle’s story begins high above the ground

The NWS explanation of winter precipitation formation examines the higher melting layers separately from the cold layers beneath them. A particle that starts as snow may melt as it passes through milder air; its subsequent fate in a lower cold layer is affected by both that layer’s temperature and its depth. How much of the particle melted earlier also matters. A single surface reading therefore cannot establish every stage.

A vertical temperature profile describes this variation with height. It does not require you to assume that air cools at the same rate everywhere as you go upwards. During winter precipitation, an intermediate milder layer may be particularly important. As a runner, your task is not to produce your own atmospheric profile before setting off, but to avoid overruling the precipitation type in a professional forecast on the basis of one temperature reading on your phone.

As a reading exercise, ask a winter weather report: what does it say about conditions at the surface, and what does it explain about higher layers? These are different scales of information, but they may be connected. If the text mentions milder air moving in aloft while cold air remains below, a current below-zero surface temperature alone does not prove that only snow will fall. Understanding the precipitation’s journey tells you more than the simplification that “it always snows below zero”.

Snow, mixed rain and snow, and ice pellets: their state on arrival also differs

The Hungarian MET-ÉSZ observation guide treats mixed rain and snow and ice pellets as separate phenomena. Mixed rain and snow contains both liquid and solid precipitation, typically in conditions close to zero degrees; ice pellets have already become solid by the time they reach the ground. The latter are not the same as the familiar image of hail associated with thunderstorms. Precise names help a running group avoid using the same word for different phenomena.

The US NWS uses the terms sleet and ice pellets for particles that refreeze before reaching the ground. The UK’s Royal Meteorological Society, however, points out that in the United Kingdom, sleet mainly refers to a mixture of rain and snow or partially melted snow. When using an app from another country, simply replacing a word with a Hungarian equivalent is therefore insufficient. The provider’s key may be decisive.

The practical implication is not that you need to learn a complicated foreign dictionary. If a screenshot sent to the group says sleet, add which provider it comes from and what phenomenon its explanation describes. Shortening this to “some kind of icy rain” may obscure whether the particles arrive already solid or freeze onto the surface. Both can make travel difficult, but the processes differ.

An adult woman runner with a head torch, winter layers, gloves and reflective details on a clear, dry running path in a lit park.Enlarge image
Editorial illustration of winter evening running created with an AI tool; not a documentary photograph.

Freezing rain may reach a cold surface as a liquid

The Met Office explains that precipitation starting as snow may melt into raindrops as it passes through a milder layer, then become supercooled in colder air below. Supercooled means that a drop remains liquid even below zero degrees. On reaching a cold surface, it may freeze onto it and form a coating of ice. In this situation, the liquid state and a below-zero temperature can therefore occur together.

This is why observing that “it is only raining” is not a complete assessment of the surface. Droplets seen through a window do not prove that every pavement, step and crossing is free of ice. Alongside precipitation type, the state of the surface matters. In an everyday running plan, do not treat a freezing rain warning as a question of choosing a rain jacket: traction and environmental conditions may affect the whole outing.

The Met Office also mentions consequences for tree branches and power lines as ice accumulates. This does not mean that every freezing rain event causes the same degree of damage. When assessing your route as a runner, however, look beyond the few centimetres immediately under your shoes. Local closures, notices from site operators and organisers’ instructions may describe conditions you cannot see from your own starting point.

Our own layered example: four different stories

The table below is our own schematic teaching model. It contains no actual radiosonde measurements, layer depths in metres or forecast for a particular settlement. Imagine the same initially solid particle aloft taking four different paths. The real process may be more complex; this outline helps you see the different sequences of melting and refreezing behind the precipitation name used at the surface.

Our schematic example What happens on the way down? What does it illustrate?
A: insufficient melting The particle remains solid until the end of its journey. A simplified case of snow reaching the ground.
B: partial melting and mixing Liquid and solid precipitation appear together at the end of the journey. The mixed nature of rain and snow falling together.
C: melting followed by refreezing The particle becomes solid again before reaching the surface. The basic idea behind ice pellets.
D: melting followed by liquid supercooling The drop reaches the cold surface as a liquid and may freeze onto it. One common formation pathway for freezing rain.

Try reading row D upwards from the surface as well. Cold conditions measured near the ground do not, on their own, tell you whether the particle passing through the air above melted earlier. This is the missing information left out of the thought “my phone shows a minus temperature, so it will snow”. For the same reason, similar surface temperatures at two neighbouring locations do not prove that their entire atmospheric profiles are identical.

The table teaches the order of processes; it does not give permission to run. In row C, the ice pellet froze while still in the air, but that does not make a particular route safe. In row B, the name mixed rain and snow does not tell you how much moisture will remain on the surface or freeze later. Meteorological classification and the usability of a particular route are related, but they are not the same decision.

Why can a single home thermometer not explain the change?

An outdoor thermometer describes the surroundings of its own position, not the entire column of air above it. A reading beside your window is also from a different location than a distant point on your running loop. If the precipitation name changes in the forecast, deciding which term is “impossible” solely from your home display is unhelpful. Read the whole change alongside the text of the professional forecast.

In borderline conditions, the time and area to which the information applies are especially important. A morning warning and an afternoon icon do not refer to the same moment. When forwarding an earlier screenshot, retain its timestamp; a rain icon saved yesterday does not refute a freezing rain warning today. Following a changing forecast also means paying attention to when it was updated.

In our example, the running team first receives a morning message preparing them for mixed rain and snow, followed later by an update indicating possible freezing rain. The useful response is to review the new conditions and clearly change the plan. Sticking to the previous message simply because everyone is already dressed does not improve the information. An update becomes genuinely helpful when it leads to a clear decision about meeting up and what happens next.

Forecast warnings, shorter-range alerts and the actual running plan

HungaroMet’s explanation of its severe weather warning system includes freezing rain among the phenomena covered by forecast warnings and shorter-range alerts. Text information accompanies the map indication; read this too rather than looking only at the colour. The warning forecast and the alert covering a shorter time horizon serve different roles. Check the current communication for your location and time directly on the official platform.

This indication is not an individual inspection of every step’s surface, while a local observation does not override hazard information for a wider area. When organising a running outing, therefore, consider the official weather report, the organiser’s communication and your own travel separately. The meeting place itself may appear easy to reach while the walking section leading to it is uncertain. Setting out and getting home are part of the whole outing.

Our sample message might read: “Because of the weather update, we are postponing this evening’s outdoor group run; please do not travel to the original start point. We will announce the new date here.” This is a fictional organisational example. Its point is to specify an action and a shared channel, so that participants do not have to decide which old message still applies while already on their way to the meeting.

A runner in winter clothing checks their watch before setting off during the short daylight window.Enlarge image
Editorial illustration of a run planned for the short winter daylight window, created with an AI tool; not a documentary photograph.

The role of equipment and the limits of route choice

A rain jacket is part of your clothing, a head torch helps with vision and visibility, and shoes are part of your footwear system. Having any of these items does not replace an assessment of current environmental conditions. During freezing rain and ice formation, do not assume that a better tread pattern or a more expensive light guarantees that an outdoor session is feasible. You do not need to justify postponing a run by first experimenting on a slippery surface.

Treat an indoor alternative as an organisational decision too. If one is available, only travel to a place you can reach safely; the name of a distant gym does not, by itself, remove the problem of getting there. A home-based alternative or a rest day may also be a sensible solution. You do not have to complete the numbers in your weekly plan unchanged in every weather situation to remain consistent in your approach to running.

For a group outing, discuss separately who will notify people who check messages less often. A well-written change is complete only when it reaches those affected and the original event information is no longer left looking unchanged alongside it. This everyday organisational detail may spare more people an unnecessary journey than a long equipment list intended to compensate for hazardous conditions.

How can you describe precisely what you actually saw?

A useful on-site observation includes the location, time and method of observation. Our example: “From the covered entrance area behind the front door, I saw a coating of ice forming on the railing; I did not walk along the pavement.” This conveys more real information than claiming “it is definitely sheet ice everywhere” when you have no basis for saying so. Precision does not diminish the warning; it shows the limits of the report.

Take photographs from a safe place, and do not step onto ice to prove the phenomenon. Nor do you need to call the coating visible in a picture your own laboratory identification. If you share your observation on an official or community platform, follow the provider’s terminology and key. The Hungarian MET-ÉSZ guide is useful precisely because it treats the description of an observed phenomenon separately from a mere impression.

Before your next winter outing, first check the current precipitation type and hazard information, then the travel and route involved in the whole plan. Understanding vertical layering helps explain why the fate of falling precipitation may differ from what a single surface number suggests. The runner’s task nevertheless remains simple: adapt the plan to fresh information and choose a clear change in good time.

Sources and conceptual framework

Checked: 21 November 2026. The four layered pathways are our own schematic teaching examples, not measured atmospheric profiles. The sample messages describe fictional situations; the 2018 MET-ÉSZ manual is a source for terminology, while current hazard information must always be read on the current official platform.

Helpful? Pass it on.